How to Build an Aircraft Hangar: Sizing, Door Types, Codes and FAA Rules
Building an aircraft hangar, whether it is a detached hangar on your lot or a hangar home with living space attached, starts with the aircraft and ends with permits. This guide walks through hangar sizing, door types, the rules that can apply, and the questions to answer before you build.
Step 1: Size the hangar for your aircraft
Size the hangar for the aircraft you fly now and the one you might own next.
Wingspan: sets the minimum door width. Add clearance on each side for safe entry.
Tail height: sets the minimum door height. Also check the door's lowest point when open.
Length: sets the hangar depth. Allow room to walk around the nose and tail.
Ground handling: leave space to use a tug or tow bar.
Extra space: workbench, storage, a shop area, a vehicle bay or living quarters.
Community rules may also set minimum and maximum hangar sizes, so check them before you finalize dimensions.
Step 2: Choose a hangar door
The door is usually the most important design decision, because each door type needs different structural support.
Bi-fold doors fold up and out in sections. They are common on residential hangars and work well for wide openings.
Hydraulic doors are a single panel that lifts outward and can double as a shade awning when open.
Sliding doors use panels that slide along a track. They are often the simplest option but need wall space on the sides.
Overhead sectional doors roll up like a large garage door and can suit smaller aircraft and narrower openings.
Pick the door before the building design is final, and confirm the open door clears your tail and any wing.
Step 3: Check the rules that apply
Community and association rules
Many airparks set hangar sizes, setbacks, roof heights, door orientation and finish materials. Get written association approval before ordering a building kit or hiring a builder.
Building permits and fire code
Your local building department decides which building and fire codes apply. NFPA 409, the Standard on Aircraft Hangars, classifies hangars by door height and floor area. Most small private hangars fall in Group III: an aircraft door 28 feet tall or less, within a maximum floor area set by construction type. Required fire protection depends on the group and on locally adopted codes (NFPA 409).
FAA airspace notice (Form 7460-1)
Under 14 CFR Part 77, you must file FAA Form 7460-1 before building near certain airports if the structure exceeds the FAA's notice criteria. Notice is required for:
Any structure more than 200 feet above ground level, anywhere
Structures that exceed an imaginary slope of 100 to 1 within 20,000 feet of a runway longer than 3,200 feet
Structures that exceed a slope of 50 to 1 within 10,000 feet of a runway of 3,200 feet or less
Construction on certain airports, such as public-use airports and airports with an FAA-approved instrument approach
These slope rules apply to public-use airports, military and federal airports, and airports with an FAA-approved instrument approach (14 CFR 77.9). When notice is required, file at least 45 days before construction starts (14 CFR Part 77, Subpart B). Notices are filed through the FAA Obstruction Evaluation website, which also offers a notice criteria tool.
At many private-use airparks, these FAA notice rules do not apply, but community height and setback rules still do.
Step 4: Plan the details
Power: door motors, lighting, outlets, a compressor, an engine heater and charging equipment.
Floor: a smooth sealed concrete floor is easier to clean and spot leaks on. Confirm slab thickness for your aircraft's weight.
Climate: insulation, heating, ventilation or air conditioning, depending on your climate and use.
Drainage: slope the apron away from the door and keep water out of the hangar.
Lighting: bright, even lighting for preflight and maintenance work.
Security: locks, lighting and cameras.
Questions to answer before you build
Does the lot have its own taxiway access, and who maintains the taxiway?
Will the hangar be attached to the home, detached, or a separate hangar row unit?
What door type and size fit your aircraft and your community's rules?
Will you do maintenance in the hangar? Fuel transfer, welding or painting can bring stricter fire-protection rules.
Is FAA Form 7460-1 notice required at your location?
Have you received written association approval and local permits?
Thinking about buying a lot to build on? Read our guide to buying and selling airpark homes, or browse airparks by state on the AirparkMap directory, including Arizona, Florida, Texas, California, Washington and Idaho.
Frequently asked questions
How big should an aircraft hangar be?
Size it for your aircraft's wingspan, tail height and length, plus clearance to walk around it and use a tug, and add space for storage or a shop. Check community size rules before finalizing.
What type of hangar door is best?
Bi-fold and hydraulic doors are common on residential hangars and handle wide openings. Sliding doors are simpler but need side wall space. Choose the door before finalizing the building design.
Do I need FAA approval to build a hangar?
You must file FAA Form 7460-1 at least 45 days before construction if the structure meets the 14 CFR Part 77 notice criteria, such as building on or near a public-use airport above certain slopes. Local permits and association approval are separate.
What is a Group III hangar?
Under NFPA 409, a Group III hangar has an aircraft door 28 feet tall or less and a floor area within limits set by construction type. Most small private hangars fall in this group.

Comments